Catalytic Activity For Oxygen Reduction Reaction Research Articles

NC Loaded PtM Alloy from M-NC with Ultralow Pt Loading for Oxygen Reduction Reaction

Abstract Developing low Pt or non-precious metal catalysts for oxygen reduction reaction (ORR) has becoming necessary in recent years. Herein, PtM alloy anchored on nitrogen-doped carbon (PtM/NC, M=Fe, Co) catalyst with ultralow Pt loading (~1 wt%) is prepared from the simple two-process pyrolysis, namely from C to M-NC then to PtM/NC. The as-prepared PtM/NC (M=Fe, Co) shows an excellent ORR catalytic performance with the peak potential and half-wave potential of 0.901 and 0.870 V for PtFe/NC, 0.868 and 0.845 V for Pt3Co/NC. The ORR on PtM/NC (M=Fe, Co) is a mainly direct 4-electron reaction pathway (3.75-3.90) in alkaline solution. Moreover, they possess good methanol tolerance and stability. Synergistic effect of Pt and M together with N species result in the excellent ORR catalytic activity of PtM/NC (M=Fe, Co). The negative shift of Pt binding energy caused by both lattice contraction and electron orbital coupling from M is beneficial for reducing the d-band center of Pt, weakening the oxygen binding energy and enhancing the ORR intrinsic activity of Pt. The strong interactions between NC and PtM alloy are beneficial for anchoring PtM nanoparticles, promoting the stability of catalyst. This work provides a new strategy for preparing ultralow Pt loading catalysts.

ORR properties of PtM (M = Fe and Ni) ordered alloys with the effect of small molecules of cyanamide

Ordered Pt alloy electrocatalysts have a special geometric structure and exhibit excellent oxygen reduction reaction (ORR) catalytic performance. Herein, we successfully prepared PtFe/PtNi ordered alloy catalysts by thermal annealing method under the protection of the encapsulated shell formed by pyrolysis of cyanamide molecules as well as the effect of the N element entering into the alloy system to cause defects, and kept the average particle size below 4 nm. The ordered structure enhances the electronic interactions, keeps more Pt0 valence states present and improves the ORR catalytic activity. Under acidic conditions, the PtFe ordered alloy catalyst had a mass activity of 0.752 A mgPt−1 and a specific activity of 1.138 mA cmPt−2, both of which were superior to the commercial Pt/C and disordered PtFe alloy. Importantly, the strong interaction between ordered Pt and Fe prevents the leaching of Fe and maintains high mass activity after a long period of circulation. DFT calculations show that the ordered PtFe alloy has a low reaction energy barrier, which is favorable for ORR.

Facile Composition of CoNi and Graphene as a Free-Standing Cathode for a High-Performance Solid-State Zinc–Air Battery

The development of solid-state zinc–air batteries (SZABs) has stimulated significant interest. However, the practical use of SZABs still encounters difficulties due to the complicated preparation process and low-performance air cathode. In this study, we developed a free-standing CoNi/graphene composite cathode without current collectors and binders. The simplified cathode structure decreased the preparation process, and the self-assembled conductive matrix increased charge transfer, which holds promise for facile preparation and high-performance SZABs. Specifically, a free-standing CoNi/graphene film was fabricated by a simple composition method. The CoNi/graphene electrocatalyst exhibited comparable oxygen reduction reaction (ORR) catalytic activity to that of Pt/C. Furthermore, the CoNi/graphene film could be directly used as a cathode, which showed an open-circuit voltage of 1.41 V and a power density of 210 mW cm−2 in alkaline liquid ZABs, as well as an open-circuit voltage of 1.43 V and a power density of 40 mW cm−2 in alkaline SZABs. This facile preparation and excellent performance offer substantial potential for practical SZAB applications.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction

AbstractThe development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well‐defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10‐phenanthroline‐based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron‐donating or electron‐withdrawing properties of the substituent groups on the phen‐based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron‐donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF−Co‐phen(OH), featuring the electron‐donating OH group, exhibited the highest ORR catalytic activity. This custom‐crafted catalyst achieved a remarkable half‐wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10−3 Hz at 0.80 V vs. RHE in an alkaline environment.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction.

The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3 Hz at 0.80 V vs. RHE in an alkaline environment.

Ag@Co/Zn N‐Doped Carbon as Antibacterial Oxygen Reduction Catalysts for Microbial Fuel Cells

Biofouling of air cathode surface decreases the electricity generation performance of membrane‐free microbial fuel cells (MFCs). Ag@Co/Zn N‐doped carbon (Ag@Co/Zn‐NC) is designed as an antibacterial oxygen reduction reaction (ORR) catalyst to inhibit biofouling on the cathode surface. The Co/Zn‐NC active component promotes ORR catalytic activity through the advantages of well‐distributed Co nanoparticles and numerous active sites. Superficial Ag nanoparticles act as antibacterial active species to inhibit bacterial proliferation and suppress biofilm growth. Ag@Co/Zn‐NC catalyst prevents bacterial adhesion and biofilm formation, effectively preventing excessive biofouling on the cathode surface. The antibacterial catalyst maintains a high catalytic activity and good ion diffusion properties without the adverse effects of biofouling, resulting in enhanced ORR durability of the air cathode. The assembled MFCs achieve high electricity generation during long‐term cyclic operation. The maximum power density retention percentage (82.6%) is higher than that of Co/Zn‐NC MFC (65.3%) and Pt/C MFC (52.4%) after continuous operation for 1200 h. Excellent operational durability is revealed for the air‐cathode MFCs assembled with the antibacterial ORR catalyst during the cyclic process. The novelty of this study is that the design of antibacterial catalysts inhibits the excessive growth of the cathode biofilm to improve the cyclic electricity generation performance of MFCs.

The electrocatalytic activity of pomelo peel-derived nitrogen-doped carbon material for oxygen reduction reaction

Exploring the non-precious metal catalysts of oxygen reduction reaction (ORR) becomes the key to promote the industrialization of new energy devices such as fuel cells and metal-air batteries because of the sluggish kinetics of ORR. Three-dimensional N-doped carbon (NC-900) material was obtained using the high-temperature pyrolysis of pomelo peel waste. The prepared NC-900 catalyst possesses an ultra-high specific surface area of 1631.3 m2·g−1, high content of 57.7 ± 0.9% pyrrolic-N, and three-dimensional porous structure. As the ORR catalyst, NC-900 has a onset potential of 0.992 V and half-wave potential of 0.859 V, comparable to 0.988 and 0.872 V of Pt/C. The typical 4-electron pathway of ORR process is occupied by the surface of NC-900. The ORR catalytic activity of NC-900 was almost unaffected by methanol. After 8 h of continuous operation, the reduction current on the surface of NC-900 was decreased only 2.7% of the initial current. Based on these outstanding ORR performances, the pomelo peel-derived NC-900 can serve as a strong competitor for the substitute of Pt/C to promote the potential industrialization of new energy devices.

Enzymolytic lignin derived Fe–N codoped porous carbon materials as catalysts for oxygen reduction reactions

Numerous active sites and hierarchical pore structures are important for improving catalytic performance for the oxygen reduction reaction (ORR). In this work, a series of iron-nitrogen-doped porous carbon materials (Fe–N–C) with ORR catalytic activity were prepared by a one-step pyrolysis method using enzymolytic lignin as the raw material, soy protein isolate and iron chloride as dopants. The results showed that the samples with the best performance have abundant Fe-Nx active sites and mesoporous structures. At the same time, the electrocatalytic results indicate that the half-wave potential of catalyst was 0.84 V, which reached 96.55% of commercial Pt/C catalysts (E1/2 = 0.86 V), it still preserves an initial current density of 92%, after 10,000 s of circulation, which is much better than Pt/C (86%). Due to the low cost, high activity and stable ORR property, the prepared non-precious metal electrocatalyst will play an important role in the applications of fuel cells.

Unraveling the Activity and Mechanism of TM@g-C4N3 Electrocatalysts in the Oxygen Reduction Reaction.

In this work, a high-throughput screening strategy and density functional theory (DFT) are jointly employed to identify high-performance TM@g-C4N3 (TM = 3d, 4d, 5d transition metals) single-atom catalysts (SACs) for the oxygen reduction reaction (ORR). Comprehensive studies demonstrated that Cu@, Zn@, and Ag@g-C4N3 show high ORR catalytic activities under both acidic and alkaline conditions with favorable overpotentials (ηORR) of 0.70, 0.89, and 0.89 V, respectively; among them, Cu@g-C4N3 is the best candidate. The ORR follows a four-electron mechanism with the final product H2O/OH-. Cu@, Zn@, and Ag@g-C4N3 catalysts also exhibit good thermal (500 K) and electrochemical (0.93-3.14 V) stabilities. Cu@, Zn@, and Ag@g-C4N3 demonstrate superior activities with low ηORR due to its moderate adsorption strength of *OH. The ηORR and the Gibbs free energy changes of *OH (ΔG4(acidic)/ΔG4(alkaline)) resemble a volcano-type relationship under acidic/alkaline conditions, respectively. Additionally, the O-O bond length in *OOH emerged as an effective structural descriptor for rapidly identifying the promising electrocatalysts. This research provides valuable insights into the origin of the ORR activity on TM@g-C4N3 and offers useful guidance for the efficient exploration of high-performance catalyst candidates.

Designing a MnF2/MnO2 heterostructure for enhanced electrocatalysis in the oxygen reduction reaction

Studying noble-metal-free oxygen reduction reaction (ORR) catalysts is crucial for advancing fuel cells. Manganese dioxide (MnO2) has garnered widespread attention due to its convenient synthesis, low cost, high electrochemical activity, and diverse structures. However, it still faces challenges, such as poor conductivity and relatively lower inherent catalytic activity. In this study, a novel ORR electrocatalyst is introduced by constructing a heterostructure of manganese fluoride (MnF2) and MnO2, referred to as MnF2/MnO2. In a 0.1 M KOH solution, the ORR half-wave potential (E1/2) of MnF2/MnO2 is measured at 0.804 V, surpassing that of the original MnO2 catalyst (0.69 V). Compared to the MnO2 electrocatalyst, the MnF2/MnO2 heterostructure exhibits faster ORR reaction kinetics and a larger electrochemically active surface area. Density functional theory (DFT) calculations confirm that the MnF2/MnO2 heterostructure possesses enhanced intrinsic conductivity, facilitating the rapid transfer of ions of and electrons. Therefore, this study provides a promising pathway for enhancing the ORR catalytic activity of noble-metal-free electrocatalysts through rational heterostructure design.

Fe[sbnd]N doped carbon materials from oily sludge as electrocatalysts for alkaline oxygen reduction reaction

Alkaline oxygen reduction reaction (ORR) presents an important role for energy conversion technologies and requires the development of an efficient electrocatalyst. Pt-based catalysts provide suitable activity; however, Pt production accessibility and high costs create hurdles to their commercial implementation. Fe coordinated within N-doped carbon materials (FeNC) are a promising alternative due to their high ORR catalytic activity, although the currently commercially available FeNC materials rely on harsh synthetic protocols which can lead to increased environmental impacts. In this work we target this issue by taking advantage of an oily sludge waste currently generated in refineries to synthesize FeNC materials, thus, avoiding the environmental impact caused by the management of this waste. The solid particles within oily sludge, which present a high concentration of C and Fe, were combined by different nitrogen sources and pyrolyzed at high temperatures.The prepared materials present a hierarchical pore structure with surface areas up to 547 m2 g−1. X-ray photoelectron spectroscopy analysis found that the impregnation of N using phenanthroline promotes the formation of pyridinic-N structures, which enhances the ORR performance compared to melamine doping. Additional doping of Fe with phenanthroline results in an ORR mass activity of 1.23 ± 0.04 A gFeNC−1 at 0.9 VRHE, iR-free in a rotating disc electrode (0.1 M KOH). This catalyst also shows a lower relative loss in activity at 0.9 VRHE after 8000 cycles in O2-saturated conditions compared to a commercial FeNC catalyst, PMF D14401, (−63.5 vs −69 %, respectively), demonstrating promise as a cheap and simple route to FeNC catalysts for alkaline ORR.

Optimization and regulation of catalytic activity and stability: Pt–Ni diamond-shaped pearl nanochains with core-shell structure as high-efficient oxygen reduction reaction catalysts

The low utilization efficiency and poor stability of carbon-supported Pt nanoparticles (Pt/C) catalyst are two main problems of proton exchange membrane fuel cells (PEMFC), which can improve the catalytic performance by forming alloys and precisely regulating morphology and structures. Here, we introduced a simple and direct method for synthesizing Pt–Ni diamond-shaped pearl nanochains (Pt–Ni DP-NCs) as efficient electrocatalyst for oxygen reduction reaction (ORR). The alloying with Ni could enhance the catalytic activity, but because of leaching out of Ni during the cathodic reaction process, which causes a poor stability. To achieve the optimal point for both high activity and robust stability, a portion of Ni is selectively etched from Pt–Ni DP-NCs precursor in advance. During the process of de-alloying, Pt atoms with high catalytic activity are exposed to the surface of the nanochain after atomic rearrangement, thus obtaining Pt–Ni etched diamond-shaped pearl nanochains (Pt–Ni EDP-NCs) with 1D core-shell structure, which consisted of Pt–Ni as the core and Pt as the shell. Benefitting from the unique 1D core-shell structure and composition, Pt–Ni EDP-NCs-9 (etched for 9 h) exhibits high catalytic activity and robust stability for ORR. The mass activity of the sample Pt–Ni EDP-NCs-9 is 0.43 A/mgPt, which is 1.65 times higher than that of the Pt–Ni DP-NCs (0.26 A/mgPt), and 2.05 times higher than that of commercial Pt/C (0.21 A/mgPt). In addition, the 1D core-shell structure enables Pt–Ni EDP-NCs to be highly stable, which only lost by 8.6% of mass activity after 10,000 long cycles, whereas Pt–Ni DP-NCs suffers from a 34% loss under the same conditions. This work provides a strategic approach for designing efficient Pt-based catalysts that simultaneously modulate activity and stability.

High-Density CoSe2 Sites Embedded within 2D Porous N-Doped Carbon for High-Performance Oxygen Reduction Reaction Electrocatalysis.

Designing and fabricating efficient and stable nonprecious metal-based oxygen reduction reaction (ORR) electrocatalysts is a pressing and challenging task for the pursuit of sustainable new energy devices. Herein, porous P-CoSe2@NC electrocatalysts with high-density carbon-coated CoSe2 sites were successfully fabricated based on a pyridyl-porphyrinic metal-organic framework (Co-TPyP MOF) via a molten salt-assisted synthesis method. The hierarchical pore and N-doping carbon substrate of P-CoSe2@NC promotes mass transfer and electron-transfer efficiency, which is beneficial to maximize CoSe2 site utilization. Well-designed P-CoSe2@NC exhibits efficient ORR catalytic activity with a high half-wave potential of 0.863 V and excellent catalytic stability. Meanwhile, rechargeable aqueous primary/quasi-solid-state ZABs based on a P-CoSe2@NC air cathode show a high peak power density and exceptional operating stability, catering to the demands of practical applications. The qualified performance and structure stability of the electrocatalytic system may be mainly attributed to the protection of the CoSe2 nanoparticle by the coated carbon layer. Given the rational design of the structure and the component of the electrocatalyst with enhanced ORR activity, we believe that this work has provided a reliable pathway to the development of high-performance transition-metal chalcogenides for energy-storage and -conversion devices.

Regulating the coordination environment of atomically dispersed Fe-N4 moieties in carbon enables efficient oxygen reduction for Zn-air batteries

Fe-N-C single-atom catalysts exhibit the highest oxygen reduction reaction catalytic activity among reported transition metal-based SACs. However, the intrinsic activity of atomically dispersed Fe-N4 moieties in carbon limits the ORR catalytic activity of current Fe-N-C. This work describes a simple method for synthesizing single-atom catalysts with atomically dispersed FeN4CxSy active sites, referred to as FeZ-N/S0.6-C. It also developed a radical polymerization approach to encapsulate ZnCl2 and [Fe(Phen)3]3+ within a polyacrylamide matrix. Due to abundant -CO and –NH2 groups in polyacrylamide, the Zn2+ and Fe complexes could be evenly distributed throughout the polymer. Subsequent one-step pyrolysis allowed the generation of nitrogen-sulfur co-doped catalysts with well-defined pore structures and uniform active sites. The introduction of S atoms by ammonium persulfate extended the Fe-N bond of the Fe-N4 moiety, while the ZnCl2 template aided in fine-tuning the channels within the catalyst. As a result, the FeZ-N/S0.6-C catalyst showed a record high half-wave potential (E1/2 = 0.93 V vs. RHE) among the reported non-noble metal catalysts regulated by S elements. Moreover, FeZ-N/S0.6-C-based aqueous Zn-air and quasi-solid Zn-air batteries achieved excellent performance and showed great application potential in energy storage and conversion devices. This work provides a new approach to encapsulate metal ions in polymers and optimize the single-atom catalyst structure by heteroatom doping to enhance the performance for sustainable applications.

Cobalt nanoparticles supported on nitrogen-doped carbon nanotubes for the efficient oxygen reduction reaction in Mg-air battery

Fabricating the non-precious-metal catalyst with desirable catalytic performance towards oxygen reduction reaction (ORR) is essential for Mg-air battery that adopts neutral brine electrolyte. However, the classic metal-nitrogen-carbon materials with strong ORR catalytic activity in alkaline solution usually display inferior performance than platinum-based catalysts in neutral environment. Herein, we construct a hybrid catalyst composed of cobalt nanoparticles and nitrogen-doped carbon nanotubes, based on pyrolyzing the mixture of melamine, pyrazole, hexadecyl trimethyl ammonium bromide, and 2-methylimidazole chelated with Co2+ and Zn2+ ions. This catalyst possesses abundant ORR catalytic active sites and mesoporous structure with large pore volume, which can result in the superior performance of Mg-air battery than that using Pt/C catalyst. Furthermore, its ORR catalytic mechanism is unraveled according to microstructure characterization and electrochemical response.

A New Approach to Fuel Cell Electrodes: Lanthanum Aluminate Yielding Fine Pt Nanoparticle Exsolution for Oxygen Reduction Reaction

AbstractDesigning an electrocatalyst with low Pt content is an immediate need for essential reactions in low temperature fuel cell systems. In the present work, La0.9925Ba0.0075Al0.995Pt0.005O3 is aimed at using with low (only 0.5%) Pt doping as an electrocatalyst for oxygen reduction reaction (ORR). The low doping level renders exsolution of 1–2 nm nanoparticles with uniform dispersion upon reduction in H2/N2 at low temperatures. Pt exsolved perovskite oxides deliver significantly enhanced catalytic activity for ORR and improved stability in alkaline media. This study demonstrates that LaAlO3 with low noble metal content holds immense potential as an electrocatalyst in real fuel cell systems.

ZIF67-ZIF8@MFC-Derived Co-Zn/NC Interconnected Frameworks Combined with Perfluorosulfonic Acid Polymer as a Highly Efficient and Stable Composite Electrocatalyst for Oxygen Reduction Reactions.

The development of precious metal-free (M-N-C) catalysts for the oxygen reduction reaction (ORR) is considered crucial for reducing fuel cell costs. Herein, Co-Zn/NC interconnected frameworks with uniformly dispersed Co nanoparticles and graphitic carbon are designed and successfully synthesized through the in situ growth of zeolitic imidazolate frameworks (ZIF67 and ZIF8) along with biomass nano-microfibrillar cellulose (MFC), followed by pyrolysis. A Co-Zn/NC composite is prepared by combining Co-Zn/NC with a perfluorosulfonic acid polymer. The Co-Zn/NC composite catalyst exhibits excellent ORR catalytic activity (E0 = 0.974 V vs. RHE, E1/2 = 0.858 V vs. RHE) and good long-term durability, with 90% current retention after 10000s, surpassing that of commercial Pt/C in alkaline media. The hierarchical porous structure, coupled with the uniform distribution of Co nanoparticles and nitrogen doping, contributes to superior electrocatalytic performance, while the interconnected frameworks and graphitic carbon ensure good stability. Additionally, the Co-Zn/NC composite demonstrates promising applications in acidic media. This strategy offers significant guidance to develop advanced non-precious metal carbon-based catalysts for highly efficient and stable ORR.

Co/Co3O4 Heterojunctions Encased in Porous N-Doped Carbon Nanocapsules for High-Performance Cathode of Rechargeable Zinc-Air Batteries.

A long-term goal of rechargeable zinc-air batteries (ZABs) has always been to design bifunctional electrocatalysts that are robust, effective, and affordable for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). It has become a feasible method to construct metal/metal oxide interfaces to achieve superior electrocatalytic performance for ORR and OER by enhanced charge transfer. In this study, Co/Co3O4 heterojunctions were successfully prepared and encased in porous N-doped mesoporous carbon (Co/Co3O4@NC) via a simple condensation-carbonization-etching method. The extensive specific surface area of Co/Co3O4@NC facilitates effective interaction between the electrolyte and the catalyst, thereby enabling sufficient exposure of active sites for the ORR and the OER, consequently enhancing the rate of transport of active species. The well-designed Co/Co3O4@NC delivers superior ORR catalytic activity with a half-wave potential of 0.82 V (vs RHE) and a low overpotential of 347 mV at 10 mA cm-2 for OER in alkaline solution. The power density of Co/Co3O4@NC-based alkaline aqueous ZAB (156.5 mW cm-2) is superior to the commercial Pt/C + IrO2-based alkaline aqueous ZAB, and the cycling stability of ZAB is up to 220 h. In addition, Co/Co3O4@NC-based ZAB shows a high power density (50.1 mW cm-2). The construction of metal/metal oxide heterojunction encased in N-doped mesoporous carbon provides a novel route for the design of bifunctional electrocatalysts for high-performance ZABs.

Self-reduced MXene-Metal interaction electrochemiluminescence support with synergistic electrocatalytic and photothermal effects for the bimodal detection of ovarian cancer biomarkers

Novel two-dimensional MXene with unique optical and electrical properties has become a new focus in the field of sensing. In particular, their metallic conductivity, good biocompatibility and high anchoring ability to biomaterials make them attractive candidates. Despite such remarkable properties, there are certain limitations, such as low oxidative stability. MXene-Metal interactions are an effective strategy to maintain the long-term stability of MXene, while also improving the electrochemical activity and optical properties. Herein, a series of MXene/Ag nanocomposites including Ti3C2/Ag, Nb2C/Ag and V2C/Ag were designed based on the surface chemistry characteristics of MXene, where MXene served as the substrate for in-situ growth of silver nanoparticles via self-reduction of Ag(NH3)2+. The results showed that V2C MXene has the strongest self-reducing ability due to its multiple variable valence states, larger interlayer space and more reactive groups. Moreover, V2C/Ag exhibited unexpected oxygen reduction reaction catalytic activity and photothermal performance. In view of which, an electrochemiluminescence-photothermal (ECL-photothermal) immunosensor was developed using V2C/Ag as ECL anchor and photothermal reagent for ultrasensitive detection of Lipolysis stimulated lipoprotein receptor. This work not only provides a simple and effective synthesis method of MXene supported metal nanocomposites, but also provides more inspirations for exploring the efficient biosensing strategies.

Ce-doping enhanced ORR kinetics and CO2 tolerance of Nd1-xCexBaCoFeO5+δ (x = 0–0.2) cathodes for solid oxide fuel cells

Addressing challenges in oxygen reduction efficiency and CO2 endurance is essential for advancing the electrochemical energy conversion performance of solid oxide fuel cells (SOFCs). This investigation introduces an innovative strategy by employing Ce doping to enhance the oxygen reduction kinetics and CO2 resistance of NdBaCoFeO5+δ (NBCF) cathodes. Ce doping effectively regulates the oxygen vacancy content, the ratio of Co3+/Co4+ and Fe3+/Fe4+ in NBCF, leading to substantial improvements in oxygen exchange, lattice diffusion, and charge transfer processes. Consequently, a significant enhancement in the oxygen reduction reaction catalytic activity and CO2 endurance is achieved. At 800 °C, the introduction of 10 mol% Ce doping results in a 65.3% reduction in Rp, reaching 0.024 Ω cm2. Simultaneously, the power density experiences a 50.8% enhancement, reaching 1.0 W cm−2. The current investigation presents a novel avenue towards the advancement of next-generation high-efficiency and stable cathode materials for SOFCs.